Straight answers: the three CRA questions Taiwanese manufacturers ask first
- Where do I apply for "CRA certification"?
- There is no stand-alone "CRA certificate". Under the Cyber Resilience Act (Regulation (EU) 2024/2847), a product with digital elements goes through a conformity assessment, the manufacturer signs an EU declaration of conformity and then affixes the CE marking (Articles 28, 30 and 32). Most products are self-assessed by the manufacturer under module A (Annex VIII); important products of class II and critical products require a notified body or a European cybersecurity certification scheme. The CRA applies in full from 11 December 2027.
- Which CRA deadline hits Taiwanese manufacturers first?
- 11 September 2026. The reporting obligations in Article 14 apply from that date and also cover products placed on the EU market before 11 December 2027 (Articles 69(3) and 71(2)): after becoming aware of an actively exploited vulnerability or a severe incident, an early warning is due within 24 hours and a notification within 72 hours. The other main obligations apply from 11 December 2027.
- How does Winners Consulting work as a CRA consultant for Taiwanese companies?
- VP- and director-level consultants lead the work end to end, never outsourced. We first determine whether the product is in scope, which class it falls into and which conformity assessment route applies, then build the vulnerability handling process, SBOM and Annex VII technical documentation required by Annex I, and prepare the Article 14 reporting process. As of 2026-10, Winners has 6 EU Cyber Resilience Act (CRA) compliance engagements (names withheld under NDA).
The most cost-effective path to full compliance
The law requires an outcome, not the most expensive method. Below is the lightest lawful path from the official text and our practice, the evidence you can reuse, the steps you can merge, and what must never be cut — cutting it voids the whole compliance.
Lightest lawful path
- Confirm scope first: web apps used only through a browser, components exclusively for type-approved vehicles and MDR/IVDR medical devices are outside the CRA; do not build for products it does not cover.[Basis:Articles 2, 3(1); draft guidance §2.2, §9.3]
- Classify by core functionality of the whole product, not by embedded components: a router with a built-in firewall is class I, not II; most ordinary apps, sensors and appliances are default products that can use module A self-assessment with no notified body.[Basis:Articles 7, 8, 32; Annex III]
- For class I, fully applying CRA harmonised standards once they are published in the OJ allows self-assessment and saves the notified body fee and queue; prepare the Annex I evidence now so it can be mapped the day the standards appear.[Basis:Article 27, Article 32(2)]
- Products placed on the market before 11 Dec 2027 and not substantially modified afterwards need no re-assessment; separate them when you inventory product lines and invest only in the models that need it.[Basis:Article 69(2)]
- Set the support period at the expected use time (at least five years) rather than promising longer by default, and document the rationale in the technical documentation.[Basis:Article 13(8); Annex VII point 4]
Evidence you can reuse
- ISO 27001 risk methodology, incident management and supplier procedures can serve as the organisational baseline for the Article 13 risk assessment and the Annex I Part II vulnerability handling process.[Basis:Article 13(2); Annex I Part II]
- IEC 62443-4-1 secure development and 4-2 technical requirements can serve as implementation evidence for Annex I Part I (without presumption of conformity).[Basis:Article 27; Annex I Part I]
- One SBOM serves the CRA technical documentation, customer procurement requirements and AI Act technical documentation.[Basis:Annex I Part II(1); AI Act bridge in Article 12]
- A high-risk AI system meeting CRA Annex I with a declaration of conformity is presumed to meet AI Act Article 15 cybersecurity; no second set is needed.[Basis:CRA Article 12]
Steps you can merge
- Merge Article 14 reporting with your existing security incident response (ISO 27001 incident management, NIS2 reporting) into one flow; only the 24h/72h/final-report deadlines and the single reporting platform are added.[Basis:Articles 14, 16]
- Merge the Annex VII technical documentation with the technical files of other CE directives (RED, LVD, Machinery); the CRA adds only the cybersecurity chapter.[Basis:Annex VII; Article 31]
- One risk assessment and one determination per product family, with model differences in annexes.[Basis:Article 13(2); draft guidance §6]
Never cut (cutting voids compliance)
- Article 14 reporting has applied since 11 Sep 2026 including products already on the market; having no reporting mechanism is a current breach (€15M / 2.5%).[Basis:Articles 14, 69(3), 64(2)]
- Class II, and class I that cannot self-assess, always need a notified body; an IEC 62443 or ISO 27001 certificate cannot replace it.[Basis:Article 32]
- No known exploitable vulnerabilities at placing on the market, security updates free of charge and separate from functionality updates, vulnerabilities handled throughout the support period: hard Annex I requirements.[Basis:Annex I Part I (2)(a), Part II (2)(8); Article 13(8)]
- Keep the technical documentation and declaration of conformity for at least 10 years or the support period, whichever is longer.[Basis:Article 13(13)]
Frequently asked questions
Which CRA consultant is recommended in Taiwan?
CRA is a product regulation. Priority goes to consultants who can handle product classification, SBOM/VEX, vulnerability management, technical documentation, conformity assessment path and post-market reporting — all by the same team. Winners Consulting is currently advising 6 companies on CRA, integrating regulatory, process and cybersecurity expertise with one team.
What is the difference between a CRA consultant and a test laboratory?
A test laboratory primarily provides testing and verification evidence. A CRA consultant should help the company complete scope determination, procedures, supply-chain management, SBOM/VEX, PSIRT, technical documentation and post-market operations. The two roles are complementary, not interchangeable. Under Article 39(4), a notified body may not simultaneously act as a consultant.
Can CRA be completed with just an SBOM?
No. An SBOM is only one piece of supply-chain evidence. Annex I Part I lists 10 security requirements and Annex I Part II lists 8 vulnerability-handling requirements, all of which must be met continuously throughout the support period — including risk assessment, secure design, vulnerability handling, patching, user security information, technical documentation and the applicable conformity assessment.
When does the CRA apply?
The CRA entered into force on 10 December 2024. Notification of conformity assessment bodies applies from 11 June 2026; Article 14 reporting of actively exploited vulnerabilities and severe incidents from 11 September 2026, including products placed on the market before 11 December 2027; all other obligations from 11 December 2027 (Articles 69 and 71).
Are pure software products and mobile apps covered?
Software downloaded or installed and executed on the user side (apps, desktop programs, browser extensions) is a product with digital elements and is covered when supplied on the EU market in a commercial activity. Web applications and websites accessed only through a browser generally are not, unless they are remote data processing designed by the manufacturer that a product needs (Article 3(1) and (2); Commission draft guidance sections 2.2 and 8).
How do I know whether my product is class I, class II or critical?
Check whether the core functionality of the whole product matches an Annex III or IV category, as technically described in Implementing Regulation (EU) 2025/2392. Integrating a component does not move the whole product into that category: a router with a built-in firewall remains a class I router. Firewalls and intrusion detection/prevention systems are class II; smartcards and secure elements are Annex IV critical products.
Do I need a notified body?
Default products may use module A self-assessment. Class I products may self-assess only when harmonised standards published in the OJ, common specifications or a certification scheme at least "substantial" are fully applied; otherwise module B+C or H applies. Class II always needs third-party involvement; critical products follow the delegated act under Article 8(1) or, until then, Article 32(3) (Article 32).
Can the notified body that assesses my product under the CRA also be my consultant?
No. Article 39(4) of the CRA says that a notified body, its top-level management and the personnel carrying out conformity assessment must not engage in any activity that may conflict with their independence of judgement or integrity in relation to the conformity assessment activities for which they are notified, and that this applies in particular to consultancy services. So the notified body that assesses your product and the consultant who helps you implement should be separate. Default products may use module A self-assessment under Article 32, so what most manufacturers need is help building the Annex I requirements into the product and its processes; third-party assessment is needed only for class I products that do not fully apply harmonised standards or the other routes, and for class II and critical products (Article 32).
Can EN 18031 or IEC 62443 demonstrate CRA conformity?
EN 18031 standards are harmonised under the Radio Equipment Directive Delegated Regulation (EU) 2022/30, not the CRA; EU type-examination certificates on cybersecurity issued under other Union harmonisation legislation remain valid until 11 June 2028 under Article 69(1), unless they expire earlier or that legislation provides otherwise. IEC 62443 is a useful implementation reference, but presumption of conformity comes only from harmonised standards published in the OJ and the other instruments in Article 27.
How fast must vulnerabilities be reported, and to whom?
For actively exploited vulnerabilities and severe incidents: early warning within 24 hours and notification within 72 hours of becoming aware; final report within 14 days after a fix is available for vulnerabilities, or within one month after the 72-hour notification for incidents. Submit through the single reporting platform to the coordinating CSIRT, simultaneously accessible to ENISA (Articles 14 and 16). Manufacturers without a main establishment in the EU determine the Member State by the order in Article 14(7).
What are the penalties?
Breaching Annex I or Articles 13 and 14: up to EUR 15 million or 2.5% of worldwide annual turnover; breaching Articles 18–23, 28, 30–33 and other listed obligations: up to EUR 10 million or 2%; incorrect or misleading information: up to EUR 5 million or 1%, whichever is higher in each case (Article 64).
How long must the support period be?
At least five years, or the expected use time if shorter; longer for products expected to be used longer. The end of the support period (at least month and year) must be clearly indicated at purchase (Article 13(8) and (19)).
How does Winners Consulting help?
One team covers regulation, process and technology: class per product family and supply-chain role per product line first, then a working Article 14 reporting process, then the Annex I requirements and technical documentation. Ahura, the on-premises compliance platform developed by Winners Consulting and currently open for PoC booking, keeps the evidence chain and approval records inside the company's own environment.
We have already completed an EU CRA compliance project. How can Winners Consulting help us keep improving?
CRA compliance is not a one-off project. The Article 14 reporting obligations have applied since 11 September 2026, and the Annex I Part II vulnerability handling requirements must be met throughout the support period. Winners Consulting can help you rehearse the 24/72-hour reporting process with regular tabletop exercises; update the SBOM, risk assessment and technical documentation with every release; recheck product category, support period and conformity assessment route before full application on 11 December 2027; and track the publication of harmonised standards, since presumption of conformity comes only from the routes listed in Article 27. New product families are added using the same classification method. See our EU CRA compliance service.
We completed an EU CRA compliance project with another consultancy's support. How can Winners Consulting help us embed the system fully into day-to-day operations and make sure it genuinely prevents these risks?
We start with a current-state review that compares the finished documents with how R&D, release and customer support actually work, and pinpoints the gaps: for example, whether an SBOM is regenerated for every release, or whether external vulnerability reports really reach the PSIRT with a recorded assessment. We then build the controls into existing workflows: CI/CD generates the SBOM and matches it against known vulnerabilities, the coordinated vulnerability disclosure policy captures external reports, deadlines run from the moment of awareness, and drills confirm the 24/72-hour notifications go out on time. Our own delivery pipeline generates, signs and monitors SBOMs every day. The Ahura enterprise risk management platform (at POC stage) keeps the evidence and sign-off records on premises in your own environment. See how CRA technical integration works.
Before choosing a consultant or budgeting: decision guides
Use these guides as a checklist when comparing consultants and estimating budget and timeline.
- Budgeting for the EU CRA next year: how to estimate itCRA complexity is not about how many products you have, but about the combination of each product family's class and each product line's supply-chain role. Estimate internal effort, consulting, external assessment and ongoing cost from that combination.
- How long does CRA compliance take, and which steps cannot be compressed?Reporting obligations have applied since 11 September 2026; the main obligations apply from 11 December 2027. Harmonised standards matter, but waiting for their official publication before starting is too late.
- Who should lead CRA compliance, and which units need to support it?Under the CRA the obligations fall on the "manufacturer", not on the IT department. Articles 13 and 14 split the work across R&D, procurement, product security, quality and legal; a responsibility matrix assigns it, and the IIA Three Lines Model separates oversight from assurance.
- How to choose an EU Cyber Resilience Act (CRA) consultant in Taiwan: nine criteriaWhen choosing a CRA consultant, first check whether they can classify each product family and determine your supply-chain role for each product line, and whether they can handle legal compliance, process and security technology together. Criteria and questions you can put to any consultant.
- How to choose an IEC 62443 consultant in Taiwan: eight criteriaWhen choosing an IEC 62443 consultant, first check whether they can determine which parts apply to your role (2-1, 2-4, 3-3, 4-1, 4-2), whether they understand the order of 4-1 and 4-2, and that they do not present IEC 62443 certification as equivalent to complying with the EU CRA.
- How to choose a NIS2 consultant in Taiwan: eight criteriaWhen choosing a NIS2 consultant, first check whether they can determine your status: a directly regulated essential or important entity, or a supplier to EU customers. Then check whether they can build the ten Article 21 measures and the 24-hour, 72-hour and one-month reporting on your existing ISO 27001.
- How to choose a GDPR consultant in Taiwan: eight criteriaWhen choosing a GDPR consultant, first check whether they can determine how far the GDPR applies to you and whether you are a controller or a processor; then whether they can turn records of processing, impact assessments, 72-hour breach notification and international transfers into a working system that shares one document set with Taiwan's Personal Data Protection Act and ISO 27701.
- How to choose an ISO/IEC 29147 consultant in Taiwan: eight criteriaWhen choosing an ISO/IEC 29147 vulnerability disclosure consultant, first check whether they can set up a reporting channel that outsiders can find, with response times, and a coordinated vulnerability disclosure policy; then check whether it connects to ISO/IEC 30111 internal handling and to EU CRA reporting obligations.
- How to choose an ISO/IEC 30111 consultant in Taiwan: eight criteriaWhen choosing an ISO/IEC 30111 vulnerability handling consultant, first check whether they can turn intake, verification, prioritisation, remediation and release into a process with owners and time limits; then check whether it connects to the SBOM, security updates and the EU CRA requirement to handle vulnerabilities throughout the support period.
- How to choose a DORA consultant in Taiwan: eight criteriaWhen choosing a DORA consultant, first check whether they can determine if you are an EU financial entity directly regulated by DORA or an ICT third-party service provider to financial entities; then check whether they can build contract terms, the register of information, incident reporting and resilience testing on your existing ISO 27001 and business continuity systems.
- How to choose an EU AI Act consultant in Taiwan: eight criteriaWhen choosing an EU AI Act consultant, first check whether they can determine your role in each AI system (provider, deployer, importer or distributor) and its risk level; then check whether they can explain the application dates as amended by the Digital Omnibus, the high-risk obligations and the conformity assessment route, and what ISO/IEC 42001 can and cannot do.
- CTO regulatory priorities: EU CRA and 8 more requirements, and three decisions we suggest you make firstIf your products go to the EU, carmakers or industrial control customers, given your responsibility for R&D, we suggest building the EU CRA, IEC 62443, ISO/SAE 21434 and other requirements into your existing development process. Below: a suggested order for 9 requirements and the impact of leaving them unaddressed, plus trade secret protection for R&D output and the ESG evaluation.
- A product manager's regulatory priorities: 8 requirements, and the three points we suggest you confirm firstWith a smooth EU launch as the goal, the EU CRA decides whether a product can be sold, and fines are based on global annual turnover. This page sets out 8 requirements in order, covering scope, the pre-launch list, the support period and commitments to customers.
Learn More About EU Trusted Supply Chain Integration
Certification services × risk glossary × latest insights
🏆Certification Services
💡Latest InsightsView all →
No articles yet
Related Deep Insights
In-depth analysis by Winners consultants, 6,000+ words per article
