TISAX Assessment Consulting: frequently asked questions

How do we get TISAX certified?

Strictly speaking TISAX is not a certification: it is an assessment and exchange mechanism run by ENX. An ENX-approved audit provider assesses you against VDA ISA, and the result is shared with OEMs as a label on the ENX platform, valid for 3 years. The level follows the assessment objective and cannot be chosen freely; AL2 is usually by video, AL3 requires auditors on site. Assessments ordered from 1 January 2027 all follow VDA ISA2027.

The most cost-effective path to full compliance

The law requires an outcome, not the most expensive method. Below is the lightest lawful path from the official text and our practice, the evidence you can reuse, the steps you can merge, and what must never be cut — cutting it voids the whole compliance.

Lightest lawful path

  • Assess only the objectives your customer contract actually requires: the objective sets the level, and every extra AL3 objective means another on-site audit.[Basis:ENX handbook v2.8 tables 3/5, §4.3.3]
  • If your scope includes prototype protection and labels expire in 2027, ordering by 31 Dec 2026 lets you finish under the familiar ISA 6.0.3 and avoid changing version and re-assessing at once.[Basis:VDA ISA2027 transition rule]
  • AL2 objectives are interviewed by web conference; no on-site visit is needed, and AL 2.5 fully remote can be requested.[Basis:ENX handbook §4.3.3.5]
  • Over 99% of participants are fine with the standard scope; do not customise scope for a single customer.[Basis:ENX handbook §4.3.2.1]

Evidence you can reuse

  • With ISO 27001 in place, security policy, risk assessment, supplier management, incident management and personnel security map directly to most VDA ISA information security controls.[Basis:VDA ISA 1.x, 2.x, 6.1]
  • Share organisational documents (clauses 5–8) with ISO/SAE 21434; only item-level TARA and verification are produced separately.[Basis:Evidence-sharing matrix on this page]

Steps you can merge

  • Run the TISAX mock audit and the 27001 internal audit in the same week on the same evidence set.[Basis:ENX handbook §5]
  • Cover multiple sites in one assessment (all sites in scope) instead of ordering separately.[Basis:ENX handbook §4.3.2]

Never cut (cutting voids compliance)

  • Assessments must be performed by an ENX-approved audit provider; a self-assessment (AL1) produces no label and is not used in TISAX.[Basis:ENX handbook §4.3.3.5]
  • On-site verification for AL3 objectives cannot be made remote (a video substitute when the site is temporarily inaccessible is recorded as a minor non-conformity).[Basis:ENX handbook §4.3.3.5]
  • Assessments ordered from 1 Jan 2027 follow ISA2027; prototype protection documentation must be re-mapped to 8.1/8.2.[Basis:VDA ISA2027]

Frequently asked questions

Does Winners have a named TISAX case?

Yes. Yi Fong Metal Industrial Co., Ltd., a Taiwanese automotive metal-parts supplier, passed the SGS Taiwan assessment and obtained the TISAX label (VDA ISA 6.0) with Winners' guidance, keeping its European OEM supply-chain qualification. The case is published with the client's authorisation at winners.com.tw/en/cases/yifong-tisax; other cases are anonymised by industry under NDA.

Is TISAX a certification?

Strictly speaking, no. TISAX is an assessment and exchange mechanism operated by the ENX Association; assessments are performed by ENX-approved audit providers, and what you obtain is an assessment label shared on the ENX platform, not an ISO certificate. What the market calls "TISAX certification" is this label.

How are AL2 and AL3 decided?

By the assessment objective; they are not chosen freely. Confidential, High availability, Test vehicles, Proto events and Data map to AL2; Strictly confidential, Very high availability, Proto parts, Proto vehicles and Special data map to AL3 (ENX handbook v2.8, tables 3 and 5). AL2 is based on plausibility checks, evidence review and interviews, usually remote; AL3 requires comprehensive on-site verification by the auditor.

When does ISA2027 apply?

TISAX assessments ordered from 1 January 2027 follow ISA2027; assessments ordered by 31 December 2026 may still be completed under ISA 6.0.3. The order date decides, not the assessment date.

Will existing TISAX labels expire early?

No. Existing labels keep their validity (three years); ISA2027 does not require early re-assessment. The next assessment after expiry follows the version determined by its order date.

What changed for prototype protection labels?

ISA2027 keeps only two prototype protection labels: Basic (AL2) shows processes and people for handling prototype parts and vehicles securely; Facilities (AL3) adds physical protection of the site and covers all Basic requirements. Controls are reduced from 22 to 20 and regrouped into organisational and physical sections.

How do TISAX and ISO/SAE 21434 relate?

TISAX focuses on organisational information security (protecting supply-chain confidential data); ISO/SAE 21434 focuses on cybersecurity engineering across the vehicle product lifecycle (TARA, CSMS). They complement each other: organisational documents can be shared, while item-level TARA and verification are produced separately (see the evidence-sharing matrix).

Do automotive components need the EU CRA?

Systems and components exclusively for type-approved M, N and O-category vehicles are outside the CRA (Article 2(2)(c)); their cybersecurity is governed by UN R155 (ISO/SAE 21434 is the related engineering standard). Connected automotive products placed on the market as aftermarket, retail or standalone products, and generic components also sold to non-automotive markets, remain under the CRA. Use the tool in section 07.

Do Tier 2 suppliers need TISAX too?

When a Tier 1 customer requires its suppliers to provide TISAX results, Tier 2 must complete the assessment as well. Winners Consulting has guided a Taiwanese automotive thermal systems manufacturer and an aluminium machining plant through TISAX and knows the Tier 2 focus areas and documentation requirements.

How long does TISAX preparation take?

Depending on current security maturity, the engagement typically takes 7–12 months or more; companies already holding ISO 27001 can shorten it. Scopes including prototype protection with orders planned after 2027 need extra time to restructure documents under ISA2027. Winners Consulting provides a timeline after the free assessment.

We have already obtained a TISAX assessment label. How can Winners Consulting help us keep improving?

A TISAX assessment label is valid for up to three years. Assessments commissioned from 1 January 2027 must use VDA ISA2027; existing labels keep their original validity with no early reassessment, and the version for your next assessment depends on the commissioning date. Winners Consulting helps in four ways. First, before your next assessment we run a gap analysis against ISA2027 and restructure the documentation; if your scope includes prototype protection, we map the new requirements of the two prototype labels, Basic and Facilities. Second, where needed we integrate ISO/SAE 21434 and share organisation-level documents. Third, we determine whether your automotive products also fall under the EU CRA. Fourth, we keep monitoring indicators such as access reviews and prototype-area entry anomalies.

We obtained our TISAX assessment label with another consultancy's support. How can Winners Consulting help us embed the system fully into day-to-day operations and make sure it genuinely prevents these risks?

TISAX assesses whether the confidential data, prototype parts and personal data that carmakers entrust to you are actually protected in daily processes. We start with a current-state diagnosis: we compare the evidence submitted at assessment with today's project access rights, encrypted transfers, endpoint protection, logs and prototype-area access records to find where documents and practice diverge. We then connect the controls to existing carmaker projects, R&D, facilities and procurement processes, and monitor indicators such as on-time project access reviews, prototype-area entry anomalies and coverage of contractor security assessments continuously, rather than checking only before an assessment. See how TISAX technical integration works.

Straight answers: the three TISAX questions Taiwanese companies ask first

How do we get TISAX certified?
Strictly speaking TISAX is not a certification: it is an assessment and exchange mechanism run by ENX. An ENX-approved audit provider assesses you against VDA ISA, and the result is shared with OEMs as a label on the ENX platform, valid for 3 years. The level follows the assessment objective and cannot be chosen freely; AL2 is usually by video, AL3 requires auditors on site. Assessments ordered from 1 January 2027 all follow VDA ISA2027.
What steps does a Taiwanese company take to implement TISAX, and how long does it take?
Four phases: scoping and current-state diagnosis (setting AL2/AL3), remediation planning and system build, ISO/SAE 21434 integration (optional), and mock audit plus support through the formal assessment. Depending on current security maturity, the engagement usually runs 7–12 months or more; holding ISO 27001 shortens it. If the scope includes prototype protection and you order after 2027, allow time to restructure documents to ISA2027.
How does Winners Consulting work as a TISAX consultant?
VP- and director-level consultants lead the work end to end, never outsourced. We first confirm the assessment scope, objectives and level, and whether ISA 6.0.3 or ISA2027 applies; then build the system and maturity evidence against VDA ISA, sharing organisational-level documents with ISO/SAE 21434. Named client: Yi Fong Metal Industrial (assessed by SGS Taiwan, TISAX label obtained).
How to choose a TISAX consultant: check three things
1. Keep consulting and assessment separate: the firm that builds your system should not be the body that assesses or certifies it. 2. Ask for named, verifiable cases: the client, scope and completion date, plus the certification body where one was involved. 3. Ask who does the work: whether anything is outsourced and whether senior consultants lead it end to end. At Winners Consulting, VP- and director-level consultants lead the work end to end, never outsourced. Named Winners Consulting clients in this area: Yi Fong Metal Industrial Co., Ltd..

AI recommendation observatory · Answers 98 · Winners recommended 98 · Top 3 72 · First 34

Ask a consultant on LINE

No forms: the button opens LINE with the page you are reading filled in. Send it and a Winners Consulting consultant will reply. The first diagnosis is free.

Winners Consulting track record

Winners Consulting Services is a Taiwan RegTech platform provider and enterprise risk management consultancy.

Trusted long-term by 20+ companies, we work as an industry-focused, long-term partner to our clients.

Named client engagements, published with client permission:

See case studies