Once you hold a TISAX label, why audit policy, process and technology together?
A TISAX label is shared with OEMs through the ENX platform and stays valid for three years. Assessors never look at documents alone; they look for evidence that controls run in day-to-day work. Your information security policy says project access rights are reviewed regularly. Do the R&D and IT ticketing workflows actually schedule that review? Does the IAM system keep a record of it? If any one of the three layers drifts, it surfaces as a finding at your next assessment.
The ENX Association's 2025 expert opinion is explicit: during the label's validity, a company must carry out regular internal audits of its information security policies and procedures, and record and retain the results as proof of active implementation at the next assessment or at an interim assessment.
This is where Winners Consulting adds value: we look at all three layers on one page. A compliance specialist confirms the assessment objective and the applicable VDA ISA version; a process specialist checks that controls are embedded in project, plant and purchasing workflows; a security engineer verifies that the system records really exist. We build on the management system you already run instead of setting up a parallel one, and VP- and director-level consultants lead the work end to end, never outsourced. For how access control and prototype protection are implemented, see TISAX technical integration.
How does Ahura let one set of TISAX evidence also serve ISO 27001 and OEM supplier reviews?
Automotive suppliers rarely face a single standard. Alongside TISAX there is often ISO 27001 and OEM supplier questionnaires, and the product itself may fall under the EU Cyber Resilience Act. Continuous cross-standard integration starts with one rule: each piece of evidence is produced once and signed off once.
The Ahura enterprise risk management platform is currently at proof-of-concept (POC) stage. What the POC already provides: 100% on-premises deployment, so OEM drawings and prototype data never leave your environment or go to the cloud; an end-to-end evidence chain in which every approval step is recorded and which is compatible with EU eIDAS certificates; a distributed group architecture that lets each site stay compliant locally; EU multilingual interfaces; and modular extension for EU regulations and international standards. In practice, a single access-review record can be retrieved from the same evidence chain for the TISAX assessment, the ISO 27001 audit and an OEM supplier review.
To be clear about scope: cross-standard comparison, gap analysis on uploaded documents, regulatory version timelines and regulatory change tracking are in development and will be released as the POC progresses, and there is no TISAX-specific module today. Once those capabilities ship, the goal is that a new VDA ISA release immediately shows which existing evidence still holds and which needs strengthening.
If you outsource your TISAX internal audit to Winners Consulting, how do we build the roadmap together?
VDA ISA control 1.5.1 asks that observance of policies is verified throughout the organization; 1.5.2 asks that information security reviews are carried out by an independent and competent body at regular intervals. Small and mid-sized automotive suppliers often get stuck here: the people who know the processes most closely are the ones least able to audit their own department.
With TISAX internal audit outsourcing, we sample control by control against VDA ISA, walking from the IT department to the door of the prototype area, and we test records rather than verbal explanations. We are direct about auditor objectivity. ISO 19011 lists independence among its auditing principles, and the ISO auditing practices guidance names "objectivity and impartiality of the internal audit process" as something certification auditors examine. Our principle: the consultant who designed a process never audits that design. Whether an external review satisfies 1.5.2 is ultimately for the ENX-approved audit provider to judge.
The output is more than a list of nonconformities. We sit down with management and turn the findings into a roadmap: what must be closed before the next assessment, what to phase in for VDA ISA2027, which applies to assessments ordered from 1 January 2027, and what can be shared with ISO 27001. An internal audit is not a TISAX assessment and does not produce a label.
How should sub-tier and prototype suppliers be audited so TISAX-level trust reaches them too?
OEMs entrust you with confidential data, and you pass part of it on to sub-tier suppliers, machine shops and logistics partners. Under VDA ISA 6.1.1, contractors and cooperation partners must be subjected to an information security risk assessment, and for high protection needs you must show that each supplier's security level is adequate. ENX's ISA2027 announcement goes further: for very high protection needs, suppliers are expected to demonstrate an adequate level of information security through a TISAX label, an equivalent third-party assessment or an appropriate supplier audit.
A TISAX supplier audit performed by Winners Consulting is a second-party audit in the ISO 19011 sense: we audit your suppliers on your behalf. It is supply chain assurance, not certification, and no certificate is issued.
| Supplier type | Audit focus (corresponding requirement) | Evidence retained |
|---|---|---|
| Sub-tier suppliers handling OEM drawings or specs | ISA 6.1.1: security risk assessment; proof of an adequate level for high protection needs | Supplier risk assessment, label check or second-party audit report |
| Design and test partners | ISA 6.1.2: valid NDAs concluded before sensitive information is shared | NDA register, data hand-over log |
| Prototype machining and logistics partners | ISA2027 prototype protection: physical and environmental security, lifecycle tracking of protected items | Access logs, prototype hand-over and return records |
| External IT service providers | ISA 1.2.4: responsibilities between the provider and your organization defined | Responsibility matrix, contract clauses |
ISA control numbers follow the ENX 2025 expert opinion on ISA 6; for ISA2027, the numbering in the new catalogue applies.
Official sources
- ENX Association — 10 Years of TISAX: VDA ISA2027 released (2026-07-01)
- ENX Association — NIS2 fulfillment through TISAX: expert opinion on the ISA6 catalogue (2025-04-24, ISA controls 1.2.4, 1.5.1, 1.5.2, 6.1.1, 6.1.2; section 2.7 internal audits)
- ISO 19011:2026 — Guidelines for auditing management systems (Edition 4, 2026-05; replaces the withdrawn 2018 edition) — ISO
- ISO/TC 176 ISO 9001 Auditing Practices Group — Guidance on internal audits (objectivity and impartiality of the internal audit process; ISO 9004:2018 clause 10.5)
- ISO/TC 176 ISO 9001 Auditing Practices Group — Guidance on ISO 19011 (first-, second- and third-party auditing of management systems)
