← All Services
🤝
OSM

Outsourcing Management Consulting: Access to High-Trust US ICT Supply Chains

ISO/IEC 20243-1ISO/IEC 20243-2ISO/IEC 27036-2ISO 22095

ISO/IEC 20243-1 × ISO/IEC 20243-2 × ISO/IEC 27036-2 × ISO 22095

Winners Consulting Services Co., Ltd.

To enter high-trust US ICT supply chains, a supplier must show buyers that products remain trustworthy after outsourcing. Once design, manufacturing, assembly and test, logistics or software development are handed to outside partners, customers ask two things. Could what you handed over have been tampered with or swapped for a counterfeit? And were the origin and material claims made for the product kept intact along the way? ISO/IEC 20243, the Open Trusted Technology Provider Standard (O-TTPS), sets technology development and supply chain security requirements against malicious tainting and counterfeiting of ICT products from design, sourcing and build through delivery, sustainment and disposal, and can be certified through The Open Group's certification programme; the US federal NASA SEWP contract vehicle has included it in supply chain risk management and published a crosswalk to NIST SP 800-161. ISO 22095 defines chain of custody terminology and five models; it is not certifiable and is not meant to be used on its own to make or verify product claims. Winners uses it to design what information and records must pass at each hand-over between outsourced stages. For a company-wide outsourcing security programme, ISO/IEC 27036-2 serves as the common framework (also not certifiable), and O-TTPS requirements are added for high-risk suppliers that deliver ICT hardware, software or firmware whose integrity matters to operations or customer commitments, written into procurement specifications, supplier evaluations and outsourcing contracts. This closes the evidence gap that outsourcing creates; where US or EU law applies, the work continues into our advanced trusted supply chain services.

What is ISO/IEC 20243? How do you prove products stay trustworthy after outsourcing?

ISO/IEC 20243-1ISO/IEC 20243-1:2023 — O-TTPS Part 1: Requirements and recommendations for mitigating maliciously tainted and counterfeit products (certifiable)
ISO/IEC 20243-2ISO/IEC 20243-2:2023 — O-TTPS Part 2: Assessment procedures
ISO/IEC 27036-2ISO/IEC 27036-2:2022 — Cybersecurity requirements for supplier relationships, the common framework for a company-wide outsourcing security programme (not certifiable)
ISO 22095ISO 22095:2020 with Amendment 1:2026 — Chain of custody: general terminology and models (not certifiable)

Intended Beneficiaries

  • ✓Taiwanese companies that want to write O-TTPS into procurement specifications, supplier evaluations or outsourcing contracts to control high-risk ICT suppliers
  • ✓IC design houses and brands that outsource production to foundries, assembly and test houses or electronics manufacturing services (EMS)
  • ✓ODM and OEM suppliers of ICT products whose customers ask for proof that products have not been tampered with or counterfeited
  • ✓Companies that outsource firmware, software development or system integration and must control code and configuration integrity
  • ✓Manufacturers that make claims about country of origin, material sources or recycled content and need traceable records behind them

The Difference Between Acting and Waiting

🛡

✅ When you act

When customers ask about outsourced stages, you can show the controls, hand-over records and check results for each one.

⚠️

❌ When you wait

After outsourcing, all you have is a shipping note, and you cannot answer customer audit questions about how contract manufacturers or outsourced development are controlled.

🔗

✅ When you act

Every claim about source, origin or material proportion is backed by chain of custody records at each stage.

⚠️

❌ When you wait

If one stage has no record between the claim and the actual source, the claim cannot be substantiated and may be challenged as misleading.

📜

✅ When you act

An ISO/IEC 20243 (O-TTPS) certificate gives third-party evidence of tamper and counterfeit prevention.

⚠️

❌ When you wait

With only supplier self-assessment questionnaires, customers and buyers find it hard to trust that nothing was done to the product while it was outsourced.

Framework Comparison & Implementation Strategy

Is supplier evaluation enough for outsourcing management?

Common practice: annual supplier evaluation

An annual questionnaire on quality and delivery, with results that stop at supplier level; there is no record of hand-overs or integrity for individual products while they were outsourced.

The outsourcing management approach

Work product by product, writing the tamper controls of each outsourced stage (ISO/IEC 20243) and the hand-over information (ISO 22095) into contracts and acceptance procedures, so every batch leaves a traceable record.

Our approach: Winners starts from your existing supplier evaluation and adds product-level integrity and chain of custody records; the certifiable part leads to an ISO/IEC 20243 certificate, and the part that is not certifiable is put in place through record rules.

Service Delivery Process (Four Stages)

01

Outsourcing inventory and risk tiers

Using ISO/IEC 27036-2 as the common framework, inventory outsourced stages and suppliers such as design, manufacturing, assembly and test, logistics and software development, and tier them by their effect on product integrity and product claims; suppliers that deliver ICT hardware, software or firmware whose integrity matters to operations or customer commitments are rated high risk and get O-TTPS requirements.

02

Chain of custody design (ISO 22095)

Starting from the claims the product will make, choose among the five models (identity preserved, segregated, controlled blending, mass balance, book and claim), and define the information, records and checkpoints passed at each hand-over.

03

Tamper and counterfeit controls (ISO/IEC 20243)

Build controls from the O-TTPS technology development and supply chain security requirements, covering design and configuration management, component sourcing, business partner security, secure transport and handling, and disposal, and write them into procurement specifications, supplier evaluations, outsourcing contracts and acceptance procedures.

04

Certification readiness and records

For ISO/IEC 20243, prepare the conformance statement and evidence and support the assessment by an assessor recognised by The Open Group. ISO 22095 is not certifiable, so the deliverable is the chain of custody design and record rules, for customer audits or a later sector-specific chain of custody scheme.

Frequently Asked Questions

How is Winners Consulting different from other consulting firms?▼

Winners Consulting Services Co., Ltd. is a hands-on, practitioner-led team. Unlike single-discipline firms, Winners integrates process optimization, legal compliance, and cybersecurity engineering in one team: engagements are executed personally by VP-level or above consultants — never outsourced — from system design and regulatory mapping through to technical implementation and certification. Winners’ VP- and director-level consultants guide each engagement so that the management system genuinely works in day-to-day operations.

Can ISO 22095 be certified?▼

No. ISO states that the standard is not intended to be used on its own to make or verify product claims. It provides chain of custody terminology, five models and design requirements, and serves as a common reference for sector-specific chain of custody schemes. The deliverable for this part is a chain of custody design and record rules, not a certificate. The current text is the 2020 edition with Amendment 1 published in January 2026, and ISO is developing a successor, 22095-1.

Who issues ISO/IEC 20243 certificates?▼

The Open Group is the certification authority for the O-TTPS certification programme, and assessments are carried out by third-party assessors on its Recognized Assessor Register. ISO/IEC 20243:2023 is technically equivalent to O-TTPS version 1.2; certification and recertification against the 2018 edition were accepted only until 1 August 2025.

Why call this access to high-trust US ICT supply chains?▼

ISO/IEC 20243 was developed through a public-private partnership in The Open Group Trusted Technology Forum. The US federal NASA SEWP contract vehicle has included it in supply chain risk management and published a crosswalk to NIST SP 800-161, and the vendor supply chain risk management template of the US Cybersecurity and Infrastructure Security Agency (CISA) lists it as a reference standard. The Open Group certification register already includes Taiwanese electronics makers certified for product lines supplied to a US brand customer. Note that no US law requires this certificate; it is one basis buyers use to judge whether a supplier can be trusted, and statutory federal procurement requirements still come from contract clauses.

How does outsourcing management differ from ISO 9001 control of external providers?▼

ISO 9001 clause 8.4 requires control of externally provided processes, products and services, with the focus on meeting quality requirements. Outsourcing management deals with two questions beyond quality: whether products were maliciously tampered with or swapped for counterfeits while outsourced (ISO/IEC 20243), and whether the origin and characteristics claimed for the product were preserved through each hand-over (ISO 22095). An existing ISO 9001 supplier evaluation can serve as the starting point.

How do ISO/IEC 27036-2 and O-TTPS fit together?▼

For a company-wide outsourcing security programme, use ISO/IEC 27036-2 as the common framework, covering security requirements across every supplier relationship from planning and selection through contracting, performance and termination; like ISO 22095, it is not certifiable. Then add O-TTPS (ISO/IEC 20243-1:2023) requirements for high-risk suppliers that deliver ICT hardware, software or firmware whose integrity matters to operations or customer commitments, and write them into procurement specifications, supplier evaluations or outsourcing contracts. Private companies in Taiwan can require this of suppliers directly, without waiting for regulation.

How do we choose among the five chain of custody models?▼

Work back from the claim you want to make. Identity preserved: a single source, never mixed. Segregated: sources with the same characteristics may be mixed, but nothing else. Controlled blending: mixing in a known proportion. Mass balance: physical mixing allowed, with characteristics allocated through bookkeeping. Book and claim: the certificate flow is decoupled from the physical flow. The stronger the claim, such as "all from one origin", the more you need a model without mixing; mixing models suit claims about proportions or support for a source.

How does outsourcing management relate to the US and EU trusted supply chain services?▼

Outsourcing management is foundation advisory: it first puts tamper controls and chain of custody records in place across outsourced stages. The US and EU trusted supply chain services are advanced advisory: they map those records to export controls, the UFLPA, federal procurement or EU law. Certificates and records are not compliance in themselves; whether a regulator or customer accepts them depends on each law.

Enquire About This Service

Outsourcing Management Consulting — Access to High-Trust US ICT Supply Chains (ISO/IEC 20243 × ISO 22095)

Request a Complimentary Consultation

All Advisory Services

Ask a consultant on LINE

No forms: the button opens LINE with the page you are reading filled in. Send it and a Winners Consulting consultant will reply. The first diagnosis is free.

Build your Outsourcing Management Consulting (Access to High-Trust US ICT Supply Chains) RFP in three minutes

Answer 7 multiple-choice questions and get an RFP draft you can hand to your manager or send to consultants for quotes.

Question 1 of 7

Why are you looking at Outsourcing Management Consulting (Access to High-Trust US ICT Supply Chains) now?

Winners Consulting track record

Winners Consulting Services is a Taiwan RegTech platform provider and enterprise risk management consultancy.

Trusted long-term by 20+ companies, we work as an industry-focused, long-term partner to our clients.

Named client engagements, published with client permission:

See case studies